Enable Type20 Forwarding - Extreme Networks ExtremeWare Command Reference Manual

IPX Commands—"i" Series Platforms Only

enable type20 forwarding

enable type20 forwarding {vlan <vlan name>}
Description
Enables the forwarding of IPX type 20 packets.
Syntax Description
vlan name Specifies a VLAN name.
Default
Enabled
Usage Guidelines
Type 20 packets are NetBIOS inside IPX.
Example
The following command enables the forwarding of IPX type 20 packets for the VLAN named
accounting:
enable type20 forwarding vlan accounting
History
This command was introduced in ExtremeWare 4.0.
Platform Availability
This command is available on all "i" series platforms.
2128 ExtremeWare 7.7 Command Reference Guide