Configure Igmp Snooping Filter - Extreme Networks ExtremeWare Command Reference Manual

configure igmp snooping filter

configure igmp snooping vlan <vlan name> ports <portlist> filter [<access
profile> | none]
Description
Configures an IGMP snooping access profile filter on VLAN ports.
Syntax Description
vlan name
portlist
access profile
none
Default
None.
Usage Guidelines
Use this command to filter multicast groups to the specified VLAN ports.
The access profile specified in this command must only include IP address type entries, and the IP
addresses included in the entries must be in the class-D multicast address space, but should not be in
the multicast control subnet range (224.0.0.x/24).
To remove IGMP snooping filtering from a port, use the
Example
The following command configures the access profile ap_multicast to filter multicast packets forwarded
to VLAN marketing on ports 2:1-2:4:
configure igmp snooping vlan marketing ports 2:1-2:4 filter ap_multicast
History
This command was first available in ExtremeWare 7.1.0.
This command was added to the Summit "e" series of switches in ExtremeWare 7.2e.
Platform Availability
This command is available on all platforms.
ExtremeWare 7.7 Command Reference Guide
Specifies a VLAN name.
Specifies one or more ports or slots and ports. On a modular switch, can be a
list of slots and ports. On a stand-alone switch, can be one or more port
numbers. May be in the form 1, 2, 3-5, 2:5, 2:6-2:8.
Specifies an access profile for the ports.
Specifies not to use an access profile for the ports.
none
configure igmp snooping filter
keyword version of the command.
2023