Configure Ipxrip Add Vlan - Extreme Networks ExtremeWare Command Reference Manual

configure ipxrip add vlan

configure ipxrip add vlan [<vlan name> | all]
Description
Configures one or all IPX VLANs to run IPX/RIP.
Syntax Description
vlan name Specifies a VLAN name.
all Specifies all VLANs.
Default
IPX/RIP is enabled by default when you configure the IPX VLAN.
Usage Guidelines
IPX/RIP is automatically enabled when a NetID is assigned to the VLAN.
Example
The following command configures the IPX VLAN named backbone to run IPX/RP:
configure ipxrip add vlan backbone
History
This command was introduced in ExtremeWare 4.0.
Platform Availability
This command is available on all "i" series platforms.
ExtremeWare 7.7 Command Reference Guide
configure ipxrip add vlan
2099