Configure Dvmrp Vlan Export-Filter - Extreme Networks ExtremeWare Command Reference Manual

IP Multicast Commands

configure dvmrp vlan export-filter

configure dvmrp vlan [<vlan name> | all] export-filter [<access profile> |
none]
Description
Configures DVMRP to filter out certain routes when performing the route advertisement.
Syntax Description
vlan name
all
access profile
none
Default
None.
Usage Guidelines
Use this command to filter out certain routes when performing the route advertisement. The filtered
routes are specified in an access profile.
Example
The following command configures DVMRP to filter out routes according to the nosales access profile:
configure dvmrp vlan accounting export-filter nosales
History
This command was first available in ExtremeWare 4.0.
Platform Availability
This command is available on the "i" series of switches only.
2012
Specifies a VLAN name.
Specifies all VLANs.
Specifies an access profile name.
Deletes any associated filter.
ExtremeWare 7.7 Command Reference Guide