Show Igmp Snooping Static Group - Extreme Networks ExtremeWare Command Reference Manual

IP Multicast Commands

show igmp snooping static group

show igmp snooping {vlan <vlan name>} static group
Description
Displays static IGMP snooping entries.
Syntax Description
vlan name Specifies a VLAN name.
Default
None.
Usage Guidelines
Use this command to display IGMP snooping filters configured on the specified VLAN. When no
VLAN is specified, all the filters will be displayed.
Example
To display the IGMP snooping static groups configured on VLAN vlan101, use the following command:
show igmp snooping vlan101 static group
The output of the command will be similar to the following:
VLAN vlan101 (4094)
Group
239.1.1.2
239.1.1.2
239.1.1.2
239.1.1.2
239.1.1.2
Total number of configured static IGMP groups = 5
Flags: (s) Static, (a) Active
History
This command was first available in ExtremeWare 7.1.0.
This command was added to the Summit "e" series of switches in ExtremeWare 7.2e.
Platform Availability
This command is available on all platforms.
2082
Port Flags
29 s-
30 s-
31 sa
32 s-
34 s-
ExtremeWare 7.7 Command Reference Guide