Show Ospf Virtual-Link - Extreme Networks ExtremeWare Command Reference Manual

show ospf virtual-link

show ospf virtual-link {routerid <routerid> <area identifier>}
Description
Displays virtual link information about a particular router or all routers.
Syntax Description
routerid
area identifier
Default
N/A.
Usage Guidelines
area identifier—Transit area used for connecting the two end-points. The transit area cannot have the IP
address 0.0.0.0.
Example
The following command displays virtual link information about a particular router:
show ospf virtual-link routerid 1.2.3.4 10.1.6.1
History
This command was available in ExtremeWare 2.0.
This command was added to the Summit "e" series of switches in ExtremeWare 7.1e.
Platform Availability
This command is available on all platforms.
ExtremeWare 7.7 Command Reference Guide
Specifies a router interface number.
Specifies an OSPF area.
show ospf virtual-link
1907