Extreme Networks ExtremeWare Command Reference Manual page 2142

ARM Commands—BlackDiamond Switch Only
Basic Accounting Configuration Information
This section uses several typical usage and configuration schemes to provide a brief overview of the
destination-sensitive accounting configuration process as a general context for the detailed command
description sections that follow.
In the most basic terms, to enable the accounting function, you must enable the accounting feature,
create a customer VLAN ID, enable IP forwarding, and configure the accounting bin using the route
map feature.
You use a special set of commands to configure the ARM module to initiate the accounting function.
2142 ExtremeWare 7.7 Command Reference Guide