Configure Ipxsap Add Vlan - Extreme Networks ExtremeWare Command Reference Manual

configure ipxsap add vlan

configure ipxsap add vlan [<vlan name> | all]
Description
Configures an IPX VLAN to run IPX/SAP routing.
Syntax Description
vlan name Specifies a VLAN name.
all Specifies all VLANs.
Default
N/A
Usage Guidelines
If no VLAN is specified, all VLANs are configured to run IPX/SAP routing. IPX/SAP routing is enabled
by default when the IPX VLAN is configured.
Example
The following command configures the IPX VLAN named accounting to run IPX/SAP routing:
configure ipxsap add vlan accounting
History
This command was introduced in ExtremeWare 4.0.
Platform Availability
This command is available on all "i" series platforms.
ExtremeWare 7.7 Command Reference Guide
configure ipxsap add vlan
2109