Displaying Map Statistics Counters - 3Com 3CRWX120695A, 3CRWX440095A Configuration Manual

WX1200# display dap status
Map: 1, IP-addr: 10.2.34.56 (vlan 'default'), MAP model: AP2750,
manufacturer: 3Com, name: DAP1
====================================================
State: operational
CPU info: IBM:PPC speed=266666664 Hz version=405GPr
Uptime: 21 hours, 27 minutes, 51 seconds
Radio 1 type: 802.11a, state: configure succeed [Enabled]
operational channel: 48 operational power: 14
base mac: 00:0b:0e:00:d2:c0
bssid1: 00:0b:0e:00:11:94, ssid: private
Displaying MAP
Statistics Counters
The all option for the display ap status command displays information
for all directly attached MAP access points and all Distributed MAP access
points configured on the switch.
The following command displays the status of a Distributed MAP access
point:
id=0x28f10158a47f0408 ram=33554432
s/n=0332600444 hw_rev=A3
(For information about the fields in the output, see the
Switch and Controller Command
To display MAP statistics counters, use the following commands:
display ap counters [port-list [radio {1 | 2}]]
display dap counters [dap-num [radio {1 | 2}]]
To display statistics counters for a MAP access point on port 6, type the
following command:
Displaying MAP Information
Reference.)
163
Wireless LAN