Reset Ftm Statistics; Set Unit Name - 3Com Switch 4500 Family Manual

Description
Use the port link-type command to configure an Ethernet port as the fabric port. This command has
the same function with the fabric-port enable command, and is available only in gigabit port view.
By default, no port is configured as the fabric port.
Note that:
After you use the port link-type xrn-fabric command to specify a port as the fabric port, you cannot
use the port link-type command to change the port to a port of other types. You need to use the undo
fabric-port command first to disable the fabric port function of the port to change the port type.
Examples
# Set GigabitEthernet 1/0/25 port as a fabric port.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] interface GigabitEthernet 1/0/25
[Sysname-GigabitEthernet1/0/25] port link-type xrn-fabric

reset ftm statistics

Syntax
reset ftm statistics
View
User view
Parameters
None
Description
Use the reset ftm statistics command to clear FTM statistics. You can use this command together with
the display ftm command to view the packet statistics processed by FTM in a period of time, thus
analyzing fabric operation status and locating problems.
Related commands: display ftm.
Examples
# Clear FTM statistics.
<Sysname> reset ftm statistics

set unit name

Syntax
set unit unit-id name unit-name
View
System view
1-13