Table 413: Cos Value Aliases Configuration Fields - Juniper JUNOS OS 10.3 - SOFTWARE Manual

Related
Documentation
Copyright © 2010, Juniper Networks, Inc.
Click one:
2.
—Adds a code-point alias. Enter information into the code point alias page as
Add
described in Table 413 on page 3203.
Edit —Modifies an existing code-point alias. Enter information into the code point
alias page as described in Table 413 on page 3203.
—Deletes an existing code-point alias.
Delete
Table 413 on page 3203 describes the related fields.

Table 413: CoS Value Aliases Configuration Fields

Field Function
Code point name Specifies the name for
a code-point—for
example,
Code point type Specifies a code-point
type. The code-point
type can be DSCP or
IP precedence.
Code point value bits Specifies the CoS
value for which an
alias is defined.
Changing this value
alters the behavior of
all classifiers that refer
to this alias.
Defining CoS Code-Point Aliases (CLI Procedure) on page 3204
Monitoring CoS Value Aliases on page 3233
Example: Configuring CoS on EX Series Switches on page 3173
Your Action
Enter a name.
af11 or be .
Select a value.
To specify a CoS value, type it in the
appropriate format:
For DSCP CoS values, use the format xxxxxx,
where x is 1 or 0—for example,
For IP precedence CoS values, use the format
xxx, where x is 1 or 0—for example,
Chapter 109: Configuring CoS
.
101110
.
111
3203