4.2
PROCESS OVERVIEW: PORT CONFIGURATION
Use the following steps as a guide to configuring console and switch ports on the device:
1. Reviewing and setting console port properties
2. Reviewing switch port status
3. Disabling / enabling and naming switch ports
4. Setting switch port speed and duplex mode
5. Enabling / disabling jumbo frame support
6. Setting auto negotiation and advertised ability
7. Setting flow control
8. Configuring link traps and link flap detection
9. Configuring broadcast suppression
10.Setting port mirroring
11.Configuring link aggregation
(Section
4.3.2)
(Section
4.3.7)
(Section
(Section
4.4.4)
(Section
4.5.4)
Matrix DFE-Platinum and Diamond Series Configuration Guide
Process Overview: Port Configuration
(Section
4.3.1)
(Section
4.3.3)
(Section
4.3.4)
(Section
4.3.5)
(Section
4.3.6)
(Section
4.3.8)
4.3.9)
Port String Syntax Used in the CLI
4-5