Clear Lldp Port Status - Enterasys Matrix 2G4072-52 Configuration Manual

3.2.4.20

clear lldp port status

Use this command to return the port status to the default value of both (both transmitting and
processing received LLDPDUs are enabled).
clear lldp port status port-string
Syntax Description
port-string
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-write.
Example
This example returns port ge.1.1 to the default state of enabled for both transmitting and processing
received LLDPDUs.
Matrix(rw)->clear lldp port status ge.1.1
Specifies the port or range of ports to be affected.
Matrix DFE-Platinum and Diamond Series Configuration Guide
Discovery Protocols Command Set
Link Layer Discovery Protocol and LLDP-MED
3-57