Enterasys Matrix 2G4072-52 Configuration Manual page 260

Discovery Protocols Command Set
Link Layer Discovery Protocol and LLDP-MED
poe
link-aggr
max-frame
med-cap
med-pol
med-loc
med-poe
port-string
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example disables the management address, MED capability, MED network policy, and MED
location identification TLVs from being sent in LLDPDUs by port ge.1.1.
Matrix(rw)->clear lldp port tx-tlv mgmt-addr med-cap med-pol med-loc ge.1.1
3-64 Matrix DFE-Platinum and Diamond Series Configuration Guide
Disable the Power via MDI IEEE 802.3 Extensions TLV
from being transmitted in LLDPDUs. Only valid for
PoE-enabled ports.
Disable the Link Aggregation IEEE 802.3 Extensions
TLV from being transmitted in LLDPDUs.
Disable the Maximum Frame Size IEEE 802.3 Extensions
TLV from being transmitted in LLDPDUs.
Disable the LLDP-MED Capabilities TLV from being
transmitted in LLDPDUs.
Disable the LLDP-MED Network Policy TLV from being
transmitted in LLDPDUs.
Disable the LLDP-MED Location Identification TLV
from being transmitted in LLDPDUs.
Disable the LLDP-MED Extended Power via MDI TLV
from being transmitted in LLDPDUs. Only valid for
PoE-enabled ports.
Specifies the port or range of ports to be affected.