Set Console Baud - Enterasys Matrix 2G4072-52 Configuration Manual

Port Configuration Command Set
Setting Console Port Properties
4.3.1.4

set console baud

Use this command to set the baud rate for one or more console ports.
set console baud rate [port-string]
Syntax Description
rate
port-string
Command Defaults
If port-string is not specified, baud rate will be set for all console ports.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to set the baud rate to 19200 on console port com.1.1:
Matrix(rw)->set console baud 19200 com.1.1
4-10 Matrix DFE-Platinum and Diamond Series Configuration Guide
Sets the console baud rate. Valid values are: 300, 600, 1200,
2400, 4800, 5760, 9600, 14400, 19200, 38400, and 115200.
(Optional) Sets baud rate for specific port(s).