Set Console Bits - Enterasys Matrix 2G4072-52 Configuration Manual

Port Configuration Command Set
Setting Console Port Properties
4.3.1.10

set console bits

Use this command to set the number of bits per character for one or more console ports.
set console bits num-bits [port-string]
Syntax Description
num-bits
port-string
Command Defaults
If port-string is not specified, bits per character will be set for all console ports.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to set bits per character to 5 for console port com.1.1:
Matrix(rw)->set console bits 5 com.1.1
4-16 Matrix DFE-Platinum and Diamond Series Configuration Guide
Specifies the number of bits per character. Valid values are 5, 6,
7, and 8.
(Optional) Sets bits per character for specific console port(s).