Table of Contents
Advertisement
State:<Disabled>
IP Address:
Probe Interval:[10 ]
Include Unknown
Neighbor
Report:<Disabled>
PIM-DM
<<Please refer to the product Release Notes before enabling
this feature>>
To configure PIMDM for an IP interface:
Highlight PIMDM Interface Configuration from the Setup
IP Multicast menu and press enter.
9033691-01
interface. The DVMRP route cost is a
relative number that represents the real
cost of using this route in the
construction of a multicast delivery tree.
It is similar to, but not defined as, the hop
count in RIP. The default cost is 1.
This field can be toggled between
Enabled and Disabled and enables or
disables DVMRP for the IP interface.
The default is Disabled.
Displays the IP address corresponding to
the IP Interface name entered above.
The Probe Interval:[10 ] field allows an
entry between 0 and 65,535 seconds and
defines the interval between 'probes'.
DVMRP defines an extension to IGMP
that allows routers to query other routers
to determine if a multicast group is
present on an given IP interface or not.
The default is 10.
Allows the L3 switch to accept a DVMRP
route report from a non-adjacent
neighbor.
VH-2402-L3 Management Guide 61
Advertisement
Table of Contents
