History-Records - 3Com 8807 Command Reference Manual

NQA Configuration Commands 1077
[SW8800] nqa administrator icmp
[3Com-administrator-icmp] frequency 10

history-records

Syntax
history-records number
undo history-records
View
NQA test group view
Parameter
number: Number of test results which can be stored in the history record.
Description
Use the history-records command to configure the Number of test results that
can be stored in the history record.
Use the undo history-records command to restore the Number of test results
that can be stored in the history record to the default value.
By default, 50 test results can be stored in the history record.
n
When this command is executed, the switch checks the redundant history records
and deletes them. Example: If the configuration allows 30 test results to be stored
in the history record while there are 50 test results in the test group, the switch
deletes the oldest 20 test results.
Example
# Set the number of test results stored in the history records to 10.
<SW8800>system-view
System View: return to User View with Ctrl+Z.
[SW8800] nqa-agent enable
[SW8800]nqa administrator icmp
[3Com-administrator-icmp] history-records 10
NQA Syntax
nqa administrator-name test-tag
undo nqa administrator-name test-tag
View
System view
Parameter
administrator-name:Name of the test administrator, 1 to 32 characters long.
test-tag:
Tag of the test operation, 1 to 32 characters long, and including no "-" symbols.