Vpn-Instance - 3Com 8807 Command Reference Manual

NQA Configuration Commands 1087

vpn-instance

Syntax
vpn-instance name
undo vpn-instance
View
NQA test group view
Parameter
name: Name of the specified VPN instance, a string of up to 19 characters.
Description
Use the vpn-instance command to set the name of the VPN instance for the test.
Use the undo vpn-instance command to cancel the name of the VPN instance
for the test.
By default, no information of the VPN instance is set.
n
You must set the name for VPN instance. Otherwise, the test will fail for the
system can not find the corresponding VPN index.
Example
# Specify the name of the VPN instance for the test as vpn1.
<SW8800>system-view
System View: return to User View with Ctrl+Z.
[SW8800] nqa-agent enable
[SW8800] nqa administrator icmp
[3Com-administrator-icmp] vpn-instance vpn1