Debugging Nqa; Description - 3Com 8807 Command Reference Manual

NQA Configuration Commands 1073
n
The filler data refers to the area that can be freely filled in the packet, that is, the
area outside the ICMP packet header. If the filler data is big in size, when sending
the packet, the system fragments the packet to pieces on demand.
Example
# Set the filler data size of the test packet to 50 bytes.
<SW8800>system-view
System View: return to User View with Ctrl+Z.
[SW8800] nqa administrator icmp
[3Com-administrator-icmp] datasize 50

debugging nqa

Syntax
debugging nqa{ all | error | event }
undo debugging nqa { all | error | event }
View
User view
Parameter
all: Specifies all types of debugging for NQA..
error: Specifies debugging for NQA error information.
event: Specifies debugging for NQA event information.

Description

Use the debugging nqa command to enable debugging for NQA.
Use the undo debugging nqa command to disable debugging for NQA.
Example
# Enable debugging for NQA error information.
<SW8800> debugging nqa error
description Syntax
description text
undo description
View
NQA test group view
Parameter
text: Brief description of the operation, 1 to 230 characters long.
Description
Use the description command to configure the brief description of the operation.