Chapter 2: Product Overview; Product Specifications - MacDon R113 Operator's Manual

2 Product Overview

2.1 Product Specifications

NOTE:
Specifications and design are subject to change without notice or obligation to revise previously sold units.
Frame and Structure
Width (transport)
Weight: base machine and
adaptor frame
Weight: base machine,
adaptor frame, and steel
conditioner
Weight: base machine,
adaptor frame, and
polyurethane conditioner
Compatible windrower
Lighting
Manual storage
Cutterbar
Number of cutting discs
Blades per disc
Disc speed (full engine speed)
Blade tip speed range
Effective cutting width
Cutting height
Cutting angle range
Adjustable shoes
Gear train protection
Converging Drums
Drives
Hydraulic motor
Cutterbar
Conditioner drive
Conditioner roll timing
Hay Conditioner Options
Steel rolls
Roll type
214077
4063 mm (160 in.)
2200 kg (4848 lb.)
2690 kg (5920 lb.)
2708 kg (5959 lb.)
MacDon M155E4 or M1170 Self-Propelled Windrower
Left and right turn signals
Plastic case on header right driveshield
Eight
Two 11 degrees bevel down
2500 rpm
80.5 m/s (180 mph)
3978 mm (13 ft.)
25 mm (1 in.)
0–8 degrees below horizontal
Standard
Shearpin (safecut)
Two drum type
Piston type into 90 degree gearbox
Direct drive through 90 degree gearbox and universal shaft
Belt drive (4HB) from 90 degree gearbox to conditioner
Timing gearbox
Optional
Steel on steel chevron conditioner rolls
15
Revision A