Table of Contents
Advertisement
3. Remove eight wheel nuts (A) that secure axle (B) to
wheel (C).
4. Separate axle (B) and wheel (C).
Lowering Caster Wheel
1. Raise the end of walking beam (A) slightly, using a suitable
lifting device capable of lifting minimum 2268 kg (5000 lb.).
2. Remove the jack stand, and lower the end of the walking
beam until caster wheel assembly (B) is on the ground.
3. Remove the blocks from the drive tires.
Raising Caster Wheel
This procedure is for raising the caster wheel. This procedure applies to both caster wheels.
1. Park the windrower on a level surface.
2. Block the wheels.
215922
MAINTENANCE AND SERVICING
Figure 5.233: Caster Wheel Assembly
Figure 5.234: Caster Wheel Assembly
374
B
C
A
B
A
Revision A
Advertisement
Table of Contents
Troubleshooting
