Charge Air Cooler - MacDon M1170NT5 Operator's Manual

3. Turn cap (A) counterclockwise to the first notch to relieve
pressure before removing the cap completely.
4. Turn cap (A) again and remove it.
5. Check the gasket for cracks or deterioration, and replace
the cap if necessary.
6. Check that the spring in the cap moves freely. Replace the
cap if the spring is stuck.
7.
8. Close the hood. For instructions, refer to
Hood, page 240.

Charge Air Cooler

A
Figure 5.20: Charge Air Cooler (CAC)
A - Turbocharger
C - Charge Air Cooler
215922
MAINTENANCE AND SERVICING
5.3.2 Closing
B
249
Figure 5.19: Coolant Tank
D
B - Charge Air Inlet Duct
D - Charge Air Outlet Duct
A
C
Revision A