Air Cleaner; Hydraulic Oil Level; Fuel Separator - MacDon M105 Assembly Instructions Manual

Self-propelled windrower

Hide thumbs Also See for M105:

Table of Contents

E. AIR CLEANER

a. Check that air cleaner cap is firmly attached,

and that all clamps on air cleaner are secure.

HOLD 0.018 in. (0.46 mm) GAUGE BETWEEN

MIDDLE COILS AND TIGHTEN CLAMP UNTIL

GAUGE IS SNUG. REMOVE GAUGE.

b. Check spring clamps (A) on charge air cooling

duct connections (at turbocharger outlet, engine

intake, and inside cooling box).

Form 169558

PRE-DELIVERY CHECKS

F. HYDRAULIC OIL LEVEL

a. Turn filler cap counter clockwise to loosen bung,

and remove dipstick.

b. Check that level is between LOW and FULL

marks.

c. Re-install filler cap, and turn clockwise to tighten

bung.

G. FUEL SEPARATOR

a. Turn drain valve by hand 1½ to 2 turns counter

clockwise until draining occurs.

b. Drain the filter sump of water and sediment until

clear fuel is visible. Clean as necessary.

c. Turn the valve clockwise to close the drain.

Revision A

Table of Contents