OSPF C
OMMANDS
CAPABILITY OPAQUE
capability opaque
Overview
This command enables opaque-LSAs. Opaque-LSAs are Type 9, 10 and 11 LSAs that
deliver information used by external applications.
By default, opaque-LSAs are enabled.
Use the no variant of this command to disables opaque-LSAs.
capability opaque
Syntax
no capability opaque
Mode
Router Configuration
Example
awplus#
awplus(config)#
awplus(config-router)#
C613-50102-01 REV C
configure terminal
router ospf 100
no capability opaque
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
908