Table of Contents
Advertisement
Serial port
Change the electrical signalling mode to RS-232
Note
The default setting for the IX30's signalling mode is RS-232. This procedure is only necessary if
the mode has been previously changed.
To change the signalling mode:
Web
1. Log into Digi Remote Manager, or log into the local Web UI as a user with full Admin access
rights.
2. Access the device configuration:
Remote Manager:
a. Locate your device as described in
device.
b. Click the Device ID.
c. Click Settings.
d. Click to expand Config.
Local Web UI:
a. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
3. Click Serial > Port 1.
IX30 User Guide
Use Digi Remote Manager to view and manage your
Electrical Signalling Mode
260
Advertisement
Table of Contents
