Table of Contents
Advertisement
Digital Input/Output and Analog Input
8. Type exit to exit the Admin CLI.
Depending on your device configuration, you may be presented with an Access selection
menu. Type quit to disconnect from the device.
Show digital I/O and analog input status and statistics
Web
1. Log into the IX30 WebUI as a user with Admin access.
2. From the menu, click Status.
3. Under Connections, click I/O.
The I/O Status page is displayed:
From the I/O Status page, you can change the output state of a digital I/O port. See
output state of digital I/O ports
Command line
1. Select the device in Remote Manager and click Actions > Open Console, or log into the IX30
local command line as a user with full Admin access rights.
Depending on your device configuration, you may be presented with an Access selection
menu. Type admin to access the Admin CLI.
2. To show the status of all digital I/Os:
> show dio
Label
-----
>
3. To show the status and statistics of an individual digital I/O:
> show dio dio1
IX30 User Guide
for more information.
Port
Direction
Output
----
---------
------
dio1
input
-
dio2
input
-
dio3
input
-
dio4
input
-
Show digital I/O and analog input status and statistics
Input
Pulse
-----
-----
on
-
on
-
on
-
on
-
Change the
840
Advertisement
Table of Contents
