Table of Contents
Advertisement
Serial port
4. Click Open next to the IP address you want to use. The login screen for the web UI launches.
a. Enter the user name and password for the IX30 in the Username and Password fields.
b. Click Login.
Filter devices for display in the Digi Navigator
You can use the Digi Navigator filters to determine the types of Digi devices you want to display. Only
the devices that are powered on and are discoverable are included.
1. Make sure Digi Navigator is
network or computer with an Ethernet cable.
2. Launch the Digi Navigator.
3. Click Filters from the green toolbar to expand the toolbar and display the filter options.
4. In the Device Filters section, a list of the Digi device types display. All types are disabled by
default, and when all are disabled, all types are displayed.
5. To filter the types that are displayed, click the enable slider for the types you want to display.
Only the enabled types will display, and all other types remain disabled and do not display.
6. Click Filters at the bottom of the expanded toolbar to minimize the toolbar and hide the
filters.
IX30 User Guide
Configure RealPort mode using the Digi Navigator
installed
and the IX30 is powered and connected to your local
258
Advertisement
Table of Contents
