Digi IX30 User Manual page 649

Applications
4. In the HTTP message body text box, type the following:
{
"name" : "AllowDeviceToSetOwnNameEnabled",
"value" : "true"
}
5. Click Send.
Upload a custom name
1. Select a device in Remote Manager that is configured to allow shell access to the admin user,
and click Actions > Open Console. Alternatively, log into the IX30 local command line as a user
with shell access.
Depending on your device configuration, you may be presented with an Access selection
menu. Type shell to access the device shell.
2. At the shell prompt, use the python command with no parameters to enter an interactive
Python session:
# python
Python 3.10.1 (default, May
[GCC 8.3.0] on linux
Type "help", "copyright", "credits" or "license" for more information.
>>>
3. Import the name submodule:
>>> from digidevice import name
4. Upload the name to Remote Manager:
>>> name.upload("my_name")
5. Use Ctrl-D to exit the Python session. You can also exit the session using exit() or quit().
Help for uploading the device name to Digi Remote Manager
Get help for uploading the device name to Digi Remote Managerby accessing help for
digidevice.name:
1. Select a device in Remote Manager that is configured to allow shell access to the admin user,
and click Actions > Open Console. Alternatively, log into the IX30 local command line as a user
with shell access.
Depending on your device configuration, you may be presented with an Access selection
menu. Type shell to access the device shell.
2. At the shell prompt, use the python command with no parameters to enter an interactive
Python session:
# python
Python 3.10.1 (default, May
[GCC 8.3.0] on linux
IX30 User Guide
9 2021, 22:49:59)
9 2021, 22:49:59)
Develop Python applications
649