Table of Contents
Advertisement
Firewall
1. Select the device in Remote Manager and click Actions > Open Console, or log into the IX30
local command line as a user with full Admin access rights.
Depending on your device configuration, you may be presented with an Access selection
menu. Type admin to access the Admin CLI.
2. At the Admin CLI prompt, use the
web-filter service:
> show web-filter
Enabled
Service
Device ID
>
If the device is configured to use Cisco Umbrella for web filtering, a device ID is displayed. The
device ID is a unique ID assigned to the device by Cisco Umbrella. If there is a problem with the
device ID, you can clear the ID. See
IX30 User Guide
show
web-filtercommand to view information about the
: true
: umbrella
: 0004b5s63f5e2de7aa
Clear the Cisco Umbrella device ID
Web filtering
for instructions.
804
Advertisement
Table of Contents
