Digi IX30 User Manual page 378

Virtual Private Networks (VPN)
b. Click the Device ID.
c. Click Settings.
d. Click to expand Config.
Local Web UI:
a. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
3. Click VPN > IPsec.
4. Click to expand Advanced.
5. For Debug level, select one of the following:
Disable debug messages.
n
Basic auditing debug: Logs basic auditing information, (for example, SA up/SA down).
n
Generic control flow : Select this for basic debugging information.
n
Detailed control flow : More detailed debugging control flow.
n
Raw data: Includes raw data dumps in hexadecimal format.
n
Sensitive material: Also includes sensitive material in dumps (for example, encryption
n
keys).
6. Click Apply to save the configuration and apply the change.

Command line
1. Select the device in Remote Manager and click Actions > Open Console, or log into the IX30
local command line as a user with full Admin access rights.
Depending on your device configuration, you may be presented with an Access selection
menu. Type admin to access the Admin CLI.
2. At the command line, type config to enter configuration mode:
> config
(config)>
IX30 User Guide
IPsec
378