Table of Contents
Advertisement
Command line interface
> scp host hostname-or-ip user username remote remote-path local local-path to
local
where:
hostname-or-ip is the hostname or ip address of the remote host.
n
username is the name of the user on the remote host.
n
remote-path is the path and filename of the file on the remote host that will be copied to the
n
IX30 device.
local-path is the location on the IX30 device where the copied file will be placed.
n
For example:
To copy firmware from a remote host with an IP address of 192.168.4.1 to the /etc/config directory on
the IX30 device, issue the following command:
> scp host 192.168.4.1 user admin remote /home/admin/bin/IX30-22.11.48.10.bin
local /etc/config/scripts to local
admin@192.168.4.1's password: adminpwd
IX30-22.11.48.10.bin
>
Transfer a file from the IX30 device to a remote host
To copy a file from the IX30 device to a remote host, use the
> scp host hostname-or-ip user username remote remote-path local local-path to
remote
where:
hostname-or-ip is the hostname or ip address of the remote host.
n
username is the name of the user on the remote host.
n
remote-path is the location on the remote host where the file will be copied.
n
local-path is the path and filename on the IX30 device.
n
For example:
To copy a support report from the IX30 device to a remote host at the IP address of 192.168.4.1:
1. Use the system support-report command to generate the report:
> system support-report /var/log/
Saving support report to /var/log/support-report-0040D0133536-22-11-28-
19:48:00.bin
Support report saved.
>
2. Use the scp command to transfer the report to a remote host:
> scp host 192.168.4.1 user admin remote /home/admin/temp/ local
/var/log/support-report-00:40:D0:13:35:36-22-11-28-19:48:00.bin to remote
admin@192.168.4.1's password: adminpwd
support-report-0040D0133536-22-11-28-19:48:00.bin
>
IX30 User Guide
100%
36MB
11.1MB/s
scp
command as follows:
Use the scp command
00:03
984
Advertisement
Table of Contents
