Digi IX30 User Manual page 77

Interfaces
6. Sixth SureLink failure: The interface will restart again.
7. Seventh Surelink failure: The device will reboot.

Web
SureLink can be configured for both IPv4 and IPv6.
1. Log into Digi Remote Manager, or log into the local Web UI as a user with full Admin access
rights.
2. Access the device configuration:
Remote Manager:
a. Locate your device as described in
device.
b. Click the Device ID.
c. Click Settings.
d. Click to expand Config.
Local Web UI:
a. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
3. Click Network > Interfaces.
4. Create a new WAN or WWAN or select an existing one:
To create a new WAN or WWAN, see
n
a Wireless Wide Area Network
To edit an existing WAN or WWAN, click to expand the appropriate WAN or WWAN.
n
IX30 User Guide
Use Digi Remote Manager to view and manage your
Configure a Wide Area Network (WAN)
(WWAN).
Wide Area Networks (WANs)
or Configure
77