Table of Contents
Advertisement
Services
7. Add Ethernet devices:
a. For Add device, click .
b. For Device, select an Ethernet device to participate in the bond pool.
c. Repeat for each appropriate Ethernet device.
8. Create a new network interface that is linked to the Ethernet bond:
a. Click Network > Interface.
b. For Add Interface, type a name for the interface and click .
c. For Device, select the Ethernet bond created above:
d. Complete the rest of the interface configuration. See
or
Configure a Local Area Network (LAN)
e. Disable any other interfaces associated with the devices that were added to the Ethernet
bond.
For example, if ETH1 and ETH2 were added to the Ethernet bond, disable the ETH1 and
ETH2 interfaces:
IX30 User Guide
Ethernet network bonding
Configure a Wide Area Network (WAN)
for further information.
595
Advertisement
Table of Contents
