Digi IX30 User Manual page 20

Digi IX30 Quick start
d. After SIM cards are installed, use a Philips #1 driver to secure the SIM slot cover. Torque
screw to 2 in lbs (225 mN m) maximum.
2. Attach cellular antennas.
Securely finger tighten each antenna to the threaded barrel using the nut at the base of the
antenna.
3. Using an Ethernet cable, connect the IX30's WAN/ETH1 port to the internet, such as a home
internet router or LAN Ethernet port in an office environment.
IX30 User Guide
Step 1: Connect your device
20