Table of Contents
Advertisement
Containers
Upload a new LXC container
Web
1. Log into the IX30 WebUI as a user with Admin access.
2. From the main menu, click Status. Under Services, click Containers.
3. Click Upload New Container.
4. From your local file system, select the container file in *.tgz format.
You can download a simple example container file, test_lxc.tgz, from the Digi website.
5. Create Configuration is selected by default. This will create a configuration on the device for
the container when it is installed. If deselected, you will need to create the configuration
manually.
6. Click Apply.
7. If Create Configuration was selected when the container was created, click to go to the
container configuration.
See
Configure a container
Configure a container
Required configuration items
The following configuration options are completed automatically if Create Configuration was
n
selected when the container was created. See
Name of the container.
l
Enable the container.
l
Whether or not the container should use the device's system libraries.
l
Determine whether or not the device should including virtual networking capabilities.
n
Additional configuration items
If virtual networking is enabled:
n
IX30 User Guide
Is member of a group that was selected on the Target page.
l
Has a tag that was selected on the Target page.
l
Is one of the devices included on the Target page.
l
for further information about configuring the container.
Upload a new LXC container
Upload a new LXC container
for details:
810
Advertisement
Table of Contents
