Digi IX30 User Manual page 866

System administration
3. Click System > Power to display the power settings.
4. The Profile setting displays the active power profile and allows you to change it. The available
options are:
Performance: The CPU clock frequency is scaled up to work in the highest available
n
frequency and provide a better system performance.
Auto: The CPU clock frequency is dynamically scaled up and down to provide better
n
performance during high demanding conditions and also to save power during
inactivity periods.
Power save: The CPU clock frequency is scaled down to work in the lowest available
n
frequency and save power.
Manual: Allows you to manually set the working frequency of the CPU. When this option
n
is selected, the setting Custom frequency is available to set the CPU working frequency
manually:
l
l
l
l
5. Toggle off LEDs enabled to disable all LEDs on the device except for the Power LED, which will
remain lit green, indicating that the device has power. If disabled, one or more LEDs will flash
periodically to indicate that the device is still active.
6. Click Apply to save the configuration and apply the change.

Command line
1. Select the device in Remote Manager and click Actions > Open Console, or log into the IX30
local command line as a user with full Admin access rights.
Depending on your device configuration, you may be presented with an Access selection
menu. Type admin to access the Admin CLI.
IX30 User Guide
198 MHz
396 MHz
528 MHz
792 MHz
Configure a power profile
866