Table of Contents
Advertisement
Applications
3. Click System > Scheduled tasks.
4. Click to enable Allow scheduled scripts to handle SMS.
5. Click Apply to save the configuration and apply the change.
Command line
1. Select the device in Remote Manager and click Actions > Open Console, or log into the IX30
local command line as a user with full Admin access rights.
Depending on your device configuration, you may be presented with an Access selection
menu. Type admin to access the Admin CLI.
2. At the command line, type config to enter configuration mode:
> config
(config)>
3. At the config prompt, type:
(config)> system schedule sms_script_handling true
(config)>
4. Save the configuration and apply the change:
(config)> save
Configuration saved.
>
5. Type exit to exit the Admin CLI.
Depending on your device configuration, you may be presented with an Access selection
menu. Type quit to disconnect from the device.
See
Configure scripts to run automatically
IX30 User Guide
Use Python to control the color of multi-colored LEDs
for more information about scheduling scripts.
666
Advertisement
Table of Contents
