Table of Contents
Advertisement
Interfaces
(config network interface my_lan)> ipv6 ?
IPv6
Parameters
---------------------------------------------------------------------
----------
enable
metric
mgmt
mtu
prefix_id
prefix_length
type
weight
Additional Configuration
---------------------------------------------------------------------
----------
connection_monitor
dhcpv6_server
(config network interface my_lan)>
View default settings for the IPv6 DHCP server:
(config network interface my_lan)> ipv6 dhcpv6_server ?
DHCPv6 server: The DHCPv6 server settings for this network interface.
Parameters
---------------------------------------------------------------------
----------
enable
(config network interface my_lan)>
d. Modify any of the remaining default settings as appropriate. For example, to change the
minimum length of the prefix:
(config network interface my_lan)> ipv6 prefix_length 60
(config network interface my_lan)>
If the minimum length is not available, then a longer prefix will be used.
See
Configure WAN/WWAN priority and default route metrics
metrics.
8. (Optional) To configure 802.1x port based network access control:
IX30 User Guide
Current Value
true
Enable
0
Metric
0
Management priority
1500
MTU
1
Prefix ID
48
Prefix length
prefix_delegation
Type
10
Weight
Active recovery
DHCPv6 server
Current Value
true
Enable
Local Area Networks (LANs)
for further information about
157
Advertisement
Table of Contents
