Wan Bonding - Digi IX30 User Manual

Services
3. Type exit to exit the Admin CLI.
Depending on your device configuration, you may be presented with an Access selection
menu. Type quit to disconnect from the device.
WAN bonding
Digi International Inc. offers a WAN bonding service as a licensed feature.
WAN bonding, a part of SD WAN (Software Defined Wide Area Networking), allows multiple internet
connections to be piped together to provide increased throughput. It also provides for assured data
delivery by duplicating packets inside the bonded tunnel to insure that latency and connection issues
on different internet connections do not result in dropped packets.
WAN bonding also provides seemless failover by automatically using multiple pips within the bonded
tunnel.
The WAN bonding service for your IX30 device must be enabled in Digi Remote Manager. Contact your
Digi sales representative for information.
Required configuration items
Enable the WAN bonding service.
n
Hostname of the external server hosting the WAN bonding service.
n
The port on the external hosting server that will be used for the WAN bonding service.
n
The username and password to authenticate with the hosting service.
n
WAN interfaces that will be bonded.
n
The password used to authenticate with the web interface.
n
Additional configuration items
The firewall zone for the new bonded interface, if other than External.
n

Web
1. Log into Digi Remote Manager, or log into the local Web UI as a user with full Admin access
rights.
2. Access the device configuration:
Remote Manager:
a. Locate your device as described in
device.
b. Click the Device ID.
c. Click Settings.
d. Click to expand Config.
Local Web UI:
IX30 User Guide
Use Digi Remote Manager to view and manage your
WAN bonding
519