Collect Device Health Data And Set The Sample Interval - Digi IX30 User Manual

Central management
c. (Optional) Set the port number on the proxy server that the device should connect to. The
default is 2138.
(config)> cloud drm proxy port integer
(config)>
17. Save the configuration and apply the change:
(config)> save
Configuration saved.
>
18. Type exit to exit the Admin CLI.
Depending on your device configuration, you may be presented with an Access selection
menu. Type quit to disconnect from the device.

Collect device health data and set the sample interval

You can enable or disable the collection of device health data to upload to Digi Remote Manager, and
configure the interval between health sample uploads. By default, device health data upload is
enabled, and the health sample interval is set to 60 minutes.
To avoid a situation where several devices are uploading health metrics information to Remote
Manager at the same time, the IX30 device includes a preconfigured randomization of two minutes for
uploading metrics. For example, if Health sample interval is set to five minutes, the metrics will be
uploaded to Remote Manager at a random time between five and seven minutes.
To disable the collection of device health data or enable it if it has been disabled, or to change the
health sample interval:

Web
1. Log into Digi Remote Manager, or log into the local Web UI as a user with full Admin access
rights.
2. Access the device configuration:
Remote Manager:
a. Locate your device as described in
device.
b. Click the Device ID.
c. Click Settings.
d. Click to expand Config.
Local Web UI:
a. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
IX30 User Guide
Configure your device for Digi Remote Manager support
Use Digi Remote Manager to view and manage your
59