Table of Contents
Advertisement
Virtual Private Networks (VPN)
Tunnel and key renegotiating
n
The lifetime of the IPsec tunnel before it is renegotiated.
l
The amount of time before the IKE phase 1 lifetime expires.
l
The amount of time before the IKE phase 2 lifetime expires
l
The lifetime margin, a randomizing amount of time before the IPsec tunnel is renegotiated.
l
Note
if the remote networks for an IPsec tunnel overlap with the networks for a WAN internet
connection (wired, cellular, or otherwise), you must configure a static route to direct the traffic either
through the IPsec tunnel, or through the WAN (outside of the IPsec tunnel). See
route
for information about configuring a static route.
Web
1. Log into Digi Remote Manager, or log into the local Web UI as a user with full Admin access
rights.
2. Access the device configuration:
Remote Manager:
a. Locate your device as described in
device.
b. Click the Device ID.
c. Click Settings.
d. Click to expand Config.
Local Web UI:
a. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
3. Click VPN > IPsec.
4. Click to expand Tunnels.
IX30 User Guide
Use Digi Remote Manager to view and manage your
IPsec
Configure a static
341
Advertisement
Table of Contents
