Table of Contents
Advertisement
Services
Configure SSH access
The IX30's default configuration has SSH access enabled, and allows SSH access to the device from
authorized users within the Internal firewall zone. If this configuration is sufficient for your needs, no
further configuration is required. See
information about configuring the SSH service to allow access from remote devices.
Required configuration items
Enable SSH access.
n
Configure access control for the SSH service.
n
Additional configuration items
Port to use for communications with the SSH service.
n
Multicast DNS (mDNS) support.
n
A private key to use for communications with the SSH service.
n
Create custom SSH configuration settings.
n
See
Set the idle timeout for IX30 users
service.
Enable or disable the SSH service
The SSH service is enabled by default. To disable the service, or enable it if it has been disabled:
Web
1. Log into Digi Remote Manager, or log into the local Web UI as a user with full Admin access
rights.
2. Access the device configuration:
Remote Manager:
a. Locate your device as described in
device.
b. Click the Device ID.
c. Click Settings.
d. Click to expand Config.
Local Web UI:
a. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
IX30 User Guide
Allow remote access for web administration and SSH
for information about setting the inactivity timeout for the SSH
Use Digi Remote Manager to view and manage your
Configure SSH access
for
496
Advertisement
Table of Contents
