Digi IX30 User Manual page 415

Virtual Private Networks (VPN)
Required configuration items
A valid OpenVPN client configuration. See
n
or Configure an OpenVPN client without using an .ovpn file
Enable OpenVPN active recovery.
n
The behavior of the IX30 device upon OpenVPN failure: either
n
Restart the OpenVPN interface
l
Reboot the device.
l
Additional configuration items
The interval between connectivity tests.
n
Whether the interface should be considered to have failed if one of the test targets fails, or all
n
of the test targets fail.
The number of probe attempts before the OpenVPN connection is considered to have failed.
n
The amount of time that the device should wait for a response to a probe attempt before
n
considering it to have failed.
To configure the IX30 device to regularly probe the OpenVPN connection:

Web
1. Log into Digi Remote Manager, or log into the local Web UI as a user with full Admin access
rights.
2. Access the device configuration:
Remote Manager:
a. Locate your device as described in
device.
b. Click the Device ID.
c. Click Settings.
d. Click to expand Config.
Local Web UI:
a. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
IX30 User Guide
Configure an OpenVPN client by using an .ovpn file
for configuration instructions.
Use Digi Remote Manager to view and manage your
OpenVPN
415