Digi IX30 User Manual page 374

Virtual Private Networks (VPN)
11. Configure test targets:
a. Add a test target:
(config vpn ipsec tunnel ipsec_example)> add surelink target end
(config vpn ipsec tunnel ipsec_example surelink target 0)>
b. Set the test type:
(config vpn ipsec tunnel ipsec_example surelink target 0)> test value
(config vpn ipsec tunnel ipsec_example surelink target 0)>
where value is one of:
n
n
n
n
n
IX30 User Guide
ping: Tests connectivity by sending an ICMP echo request to a specified hostname
or IP address.
Specify the hostname or IP address:
l
(config vpn ipsec tunnel ipsec_example surelink target 0)>
ping_host host
(config vpn ipsec tunnel ipsec_example surelink target 0)>
(Optional) Set the size, in bytes, of the ping packet:
l
(config vpn ipsec tunnel ipsec_example surelink target 0)>
ping_size [num]
(config vpn ipsec tunnel ipsec_example surelink target 0)>
dns: Tests connectivity by sending a DNS query to the specified DNS server.
Specify the DNS server. Allowed value is the IP address of the DNS server.
l
(config vpn ipsec tunnel ipsec_example surelink target 0)>
dns_server ip_address
(config vpn ipsec tunnel ipsec_example surelink target 0)>
dns_configured: Tests connectivity by sending a DNS query to the DNS servers
configured for this interface.
http: Tests connectivity by sending an HTTP or HTTPS GET request to the specified
URL.
Specify the url:
l
(config vpn ipsec tunnel ipsec_example surelink target 0)>
http_url value
(config vpn ipsec tunnel ipsec_example surelink target 0)>
where value uses the format http[s]://hostname/[path]
interface_up: The interface is considered to be down based on the interfaces down
time, and the amount of time an initial connection to the interface takes before this
test is considered to have failed.
(Optional) Set the amount of time that the interface can be down before this
l
test is considered to have failed:
IPsec
374