Digi IX30 User Manual page 164

Interfaces
4. Create a LAN interface for the bridge:
a. Click Network > Interfaces.
b. For Add Interface, type a name for the interface and click .
c. For Zone, select Internal.
d. For Device, select the new bridge.
e. Click to expand IPv4.
f. For Address, type the IPv4 address and netmask, using the format IPv4_address/netmask,
for example, 192.168.3.1/24.
g. Enable the DHCP server:
i. Click to expand DHCP server.
ii. Click to toggle on Enable.
5. Disable the ETH1 interface:
a. Click Network > Interfaces > ETH1.
b. Click to toggle off Enable.
6. Click Apply to save the configuration and apply the change.

Command line
1. Select the device in Remote Manager and click Actions > Open Console, or log into the IX30
local command line as a user with full Admin access rights.
Depending on your device configuration, you may be presented with an Access selection
menu. Type admin to access the Admin CLI.
IX30 User Guide
Local Area Networks (LANs)
164