Table of Contents
Advertisement
Services
For example:
(config)> add network sdwan wan_bonding interfaces end
/network/interface/wan1
(config)>
b. Repeat for each additional interface.
9. Set the password for authentication to the WAN bonding web interface.
The WAN bonding web interface can be used to view detailed WAN bonding statistics and to
fine-tune the WAN bonding process, and is accessed via a web browser at http://ip-
address:8088, where ip-address is the IP address of the local IX30 device.
(config)> network sdwan wan_bonding web_interface password password
(config)>
10. Save the configuration and apply the change:
(config)> save
Configuration saved.
>
11. Type exit to exit the Admin CLI.
Depending on your device configuration, you may be presented with an Access selection
menu. Type quit to disconnect from the device.
IX30 User Guide
WAN bonding
523
Advertisement
Table of Contents
