Table of Contents
Advertisement
Virtual Private Networks (VPN)
Repeat this step to list additional interfaces.
To limit access based on firewall zones:
n
(config vpn openvpn server name)> add acl zone end value
(config vpn openvpn server name)>
Where value is a firewall zone defined on your device, or the any keyword.
Repeat this step to include additional firewall zones.
9. (Optional) Set additional OpenVPN parameters.
IX30 User Guide
Use ... network interface ? to display interface information:
(config vpn openvpn server name)> ... network interface ?
Interfaces
Additional Configuration
-------------------------------------------
defaultip
defaultlinklocal
eth1
eth2
loopback
modem
(config vpn openvpn server name)>
Display a list of available firewall zones:
Type ... firewall zone ? at the config prompt:
(config vpn openvpn server name)> ... firewall zone ?
Zones: A list of groups of network interfaces that can be
referred to by packet
filtering rules and access control lists.
Additional Configuration
--------------------------------------------------------
-----------------------
any
dynamic_routes
edge
external
internal
ipsec
loopback
setup
(config vpn openvpn server name)>
Default IP
Default Link-local IP
ETH1
ETH2
Loopback
Modem
OpenVPN
402
Advertisement
Table of Contents
