Signal Quality Indicators - Digi IX30 User Manual

Digi IX30 hardware reference
Solid yellow (or orange)
Initializing or starting up.
Flashing yellow (or orange)
In the process of connecting to the
cellular network and to a device on
its ETH2 port.
Flashing green
Connected to 2G or 3G and is in the
process of connecting to any device
on its ETH2 port, or nothing is
connected to the port.
Flashing blue
Connected to 4G LTE and in the
process of connecting to a device on
its ETH2 port.
Alternating Red/yellow (or orange)
Upgrading firmware.

Signal quality indicators

LEDs labeled 1 through 5 Indicate the cellular service quality level.
Signal bars
The weighted dBm measurements are negative numbers, meaning values closer to zero denote a
larger number. For example, a -85 is a better signal than -90.
Note See Signal quality bars explained
calculated and subsequently displayed via the LED indicators.
IX30 User Guide
WARNING! DO NOT POWER OFF DURING FIRMWARE UPGRADE.
Weighted dBm
-113 to -99
-98 to -87
-86 to -76
-75 to -64
-63 to -51
for more information regarding how signal strength is
Flashing white
ETH2 port connection established
and in the process of connecting to
the cellular network.
Solid green
Connected to 2G or 3G and also has
a device linked to its ETH2 port.
Solid blue
Connected to the 4G LTE and also
has a device link to its ETH2 port.
Signal strength %
0% to 23%
24% to 42%
43% to 61%
62% to 80%
81% to 100%
IX30 LEDs
Quality
Bad
Marginal
OK
Good
Excellent
26