Digi IX30 User Manual page 648

Applications
# python
Python 3.10.1 (default, May
[GCC 8.3.0] on linux
Type "help", "copyright", "credits" or "license" for more information.
>>>
3. Import the runt submodule:
>>> from digidevice import runt
>>>
4. Use the help command with runt:
>>> help(runt)
Help on module acl.runt in digidevice:
NAME
acl.runt - Python interface to ACL runtime database (runtd).
...
5. Use Ctrl-D to exit the Python session. You can also exit the session using exit() or quit().
Use Python to upload the device name to Digi Remote Manager
The name submodule can be used to upload a custom name for your device to Digi Remote Manager.
When you use the name submodule to upload a custom device name to Remote Manager, the
following issues apply:
If the name is being used by to another device in your Remote Manager account, the name will
n
be removed from the previous device and added to the new device.
If Remote Manager is configured to apply a profile to a device based on the device name,
n
changing the name of the device may cause Remote Manager to automatically push a profile
onto the device.
Together, these two features allow you to swap one device for another by using the name submodule
to change the device name, while guaranteeing that the new device will have the same configuration
as the previous one.
Note Because causing a profile to be automatically pushed from Remote Manager may change the
behavior of the device, including overwriting existing usernames and passwords, the name
submodule should be used with caution. As a result, support for this functionality is disabled by
default on Remote Manager.
Enable support on Digi Remote Manager for uploading custom device names
1. In Remote Manager, click API Explorer.
2. For the HTTP method, select PUT.
3. For Enter and API or select an example, type
/ws/v1/settings/inventory/AllowDeviceToSetOwnNameEnabled.
IX30 User Guide
9 2021, 22:49:59)
Develop Python applications
648